Low-Flow Cutter Head
Now, there's a faster, better way to clear land.
Gyro-Trac brings its legendary cutter head technology to the low-flow compact track loader and skid steer markets with the fixed-tooth planar-head Toma-Ax Low Flow Cutter Head. This revolutionary low-flow mulching attachment will clear more small trees and scrub in less time and with far less work than other competing products in its class. In fact, there IS no other product in its class! Only because of our revolutionary technology. The Toma-Ax Low Flow Cutter Head attaches to any compact track loader or skid steer easily, and our knife-like teeth can be removed and replaced quickly.
Download Toma-Ax Low Flow Spec sheet (PDF)
Learn about our 500HF high-flow attachment
- Lightweight planar drum
- Fixed "knife-like" teeth
- Easily mounts on any compact track loader or skid steer
All specifications subject to change without notice.
| DIMENSIONS |
| Cutting Width |
51" |
1295.40 mm |
| Overall Width |
58" |
1473.2 mm |
| Overall Height |
38" |
965.2 mm |
| Overall Depth |
31" |
787.4 mm |
| Weight |
1216 lbs. |
552.7 kg |
| PERFORMANCE* |
| Number of Teeth |
20 |
| Recommended RPM |
3100-4500 RPM** |
| Tractor HP |
60-110 HP |
| Maximum Flow |
25 gpm |
| Minimum Flow |
17 gpm |
FOR USE ONLY WITH SKID STEERS OR COMPACT TRACK LOADERS EQUIPPED WITH ENCLOSED CABS. REQUIRES CASE DRAIN.
Certain applications may require SAE-certified ROPS/FOPS skid steers. |
| Case Drain Return Pressure Limits |
| Maximum (continuous) |
28 psi |
| Intermittent (cold start) |
87 psi |
* All specifications are preliminary and are subject to change without notice.
** Dependent upon horsepower and flow.
WARNING: This cutter head is a LOW-FLOW attachment ONLY.
Learn about our 500HF high-flow attachment
